Chemistry Calculations Made Simple: Moles, Molarity, Dilution and Stoichiometry with Worked Examples

Almost every chemistry problem, from preparing a lab solution to balancing an industrial process, comes down to a handful of calculations: converting grams to moles, finding a concentration, diluting a stock solution, and working out how much product a reaction will make. The formulas are short, but students lose marks on unit slips and on picking the wrong formula. This guide covers each calculation with worked examples you can check by hand or in the Free Technology Calculators app.

If units are your weak spot, read Unit Conversions and Dimensional Analysis first. Dimensional analysis is the best way to catch errors in every problem below.

1. The mole and molar mass

A mole is 6.022 × 1023 particles. Its practical value is that the molar mass (grams per mole) of a substance equals the sum of the atomic masses in its formula. The core relation is:

moles (n) = mass (g) / molar mass (g/mol)
mass (g)  = n × molar mass

Example 1. How many moles are in 5.85 g of NaCl? Molar mass of NaCl = 23.0 + 35.5 = 58.5 g/mol (58.44 with more precise values). So n = 5.85 / 58.5 = 0.100 mol.

Example 2. Molar mass of H2SO4 = 2(1.0) + 32.1 + 4(16.0) = 98.1 g/mol. A 49.0 g sample is 49.0 / 98.1 ≈ 0.50 mol.

2. Molarity

Molarity (M) is moles of solute per litre of solution:

M = n / V (V in litres)

Example 3. 0.100 mol of NaCl is dissolved and made up to 250 mL. V = 0.250 L, so M = 0.100 / 0.250 = 0.400 M.

Example 4: preparing a solution. How much NaOH (molar mass 40.0 g/mol) is needed for 500 mL of 0.20 M solution? n = M × V = 0.20 × 0.500 = 0.100 mol. Mass = 0.100 × 40.0 = 4.0 g. Dissolve in a little water, then make up to the 500 mL mark in a volumetric flask. Do not add 500 mL of water to the solid, because the final volume is what matters.

3. Other ways to express concentration

MeasureDefinitionTypical use
Molarity (M)mol solute / L solutionLab reactions, titrations
Molality (m)mol solute / kg solventColligative properties; independent of temperature
% w/vg solute per 100 mL solutionPharmacy, saline
% w/wg solute per 100 g solutionCommercial acids
ppmmg solute per L (dilute water solutions)Water quality

Example 5: molality. 10.0 g of NaOH (0.250 mol) in 500 g of water. Molality = 0.250 mol / 0.500 kg = 0.500 mol/kg. Notice the denominator is the mass of the solvent, not the solution.

Example 6: ppm. A water sample contains 50 mg of a contaminant in 1 L. For dilute aqueous solutions, 1 mg/L ≈ 1 ppm, so this is about 50 ppm.

4. Dilution: C1V1 = C2V2

When you add solvent, the amount of solute does not change, only the volume does. Since moles = C × V, the moles before and after are equal:

C1 × V1 = C2 × V2
V1 = C2 × V2 / C1

Example 7. Prepare 500 mL of 1.0 M HCl from a stock of about 12 M (roughly 37% w/w). V1 = (1.0 × 500) / 12 = 41.7 mL. Measure 41.7 mL of stock and dilute to 500 mL. Always add acid to water, not water to acid, and work in a fume hood with eye protection.

Example 8: serial dilution. Diluting 1 mL of solution into 9 mL of water makes a 1:10 dilution (the dilution factor is 10). Repeating this three times gives a factor of 103, so a 0.1 M stock becomes 0.1 × 10−3 = 1 × 10−4 M.

5. Mixing two solutions of the same solute

Add the moles, add the volumes, then divide. Example 9. Mix 100 mL of 0.50 M with 200 mL of 0.20 M of the same solute. Moles = 0.100 × 0.50 + 0.200 × 0.20 = 0.050 + 0.040 = 0.090 mol. Volume = 0.300 L (assuming volumes are additive, which is a good approximation for dilute solutions). Final concentration = 0.090 / 0.300 = 0.30 M.

6. Titration

At the equivalence point of a 1:1 reaction, the moles of acid equal the moles of base. For other ratios, include the mole ratio from the balanced equation.

Example 10. 25.0 mL of NaOH of unknown concentration is neutralised by 20.0 mL of 0.100 M HCl. Moles HCl = 0.0200 × 0.100 = 0.00200 mol = moles NaOH (1:1). Concentration of NaOH = 0.00200 / 0.0250 = 0.0800 M.

Example 11 (2:1 ratio). H2SO4 + 2NaOH → Na2SO4 + 2H2O. If 20.0 mL of 0.100 M NaOH neutralises 10.0 mL of H2SO4: moles NaOH = 0.00200, so moles H2SO4 = 0.00100, and its concentration is 0.00100 / 0.0100 = 0.100 M.

7. Stoichiometry, limiting reagent and yield

Stoichiometry uses the balanced equation as a conversion factor. The standard route is grams → moles → mole ratio → moles of target → grams.

Example 12. 2H2 + O2 → 2H2O. You have 4.0 g of H2 (molar mass 2.0, so 2.0 mol) and 16.0 g of O2 (molar mass 32.0, so 0.50 mol).

  • 0.50 mol of O2 needs 1.0 mol of H2, and 2.0 mol is available. H2 is in excess.
  • O2 is the limiting reagent. Water formed = 2 × 0.50 = 1.0 mol = 18.0 g.
  • If you collect 15.0 g, percent yield = 15.0 / 18.0 × 100 = 83.3%.

8. Gas calculations

The ideal gas law is PV = nRT, with R = 0.08206 L·atm/(mol·K) when pressure is in atm, volume in litres and temperature in kelvin. Example 13. The volume of 1 mol of ideal gas at 25 °C (298.15 K) and 1 atm is V = nRT/P = 0.08206 × 298.15 = 24.5 L. At 0 °C (273.15 K) it is 22.4 L. Always convert °C to K by adding 273.15, and see the thermodynamics link below for more on temperature problems.

Quick formula table

TaskFormula
Moles from massn = m / M
MolarityM = n / V(L)
DilutionC₁V₁ = C₂V₂
Mass for a solutionm = M × V(L) × molar mass
Percent yieldactual / theoretical × 100
Ideal gasPV = nRT

Common mistakes

  • Using mL instead of L in molarity. Convert first: 250 mL = 0.250 L.
  • Confusing molarity and molality. One uses solution volume, the other solvent mass.
  • Forgetting to balance the equation before using mole ratios.
  • Using grams, not moles, to find the limiting reagent. Compare moles scaled by the coefficients.
  • Mixing up the dilution volumes. V2 is the final total volume, not the water added.
  • Wrong significant figures. Match the least precise measurement.

Using the app for chemistry

Free Technology Calculators is built for quick checks like these. Use it to confirm your answer after you have worked a problem by hand, not to skip the method. Exam questions test whether you know why C1V1 = C2V2 works, not only the result. Install it from Google Play, and see more tools in Free Calculators for Engineering Students. Related reading: Thermodynamics and Heat Transfer Formulas and Choosing the Right Statistical Test for analysing lab data.

Frequently asked questions

Why must I use the final volume in molarity?

Molarity is defined per litre of solution, and dissolving a solute changes the total volume. That is why you make up to the mark in a volumetric flask.

Does C₁V₁ = C₂V₂ work for any units?

Yes, as long as the concentration units match on both sides and the volume units match on both sides.

What is the difference between molarity and normality?

Normality multiplies molarity by the number of equivalents per mole (for example 2 for H₂SO₄ in acid-base reactions). It is less common now, and many courses use molarity with explicit mole ratios instead.

How do I know which reagent is limiting?

Convert each reactant to moles, divide by its coefficient in the balanced equation, and the smallest result belongs to the limiting reagent.

Conclusion

Master the mole, molarity and C1V1 = C2V2 and most introductory chemistry calculations become routine. Write units on every line, convert to litres and moles early, and check that your answer is physically sensible. Then verify in the Free Technology Calculators app.

Disclaimer: This article is for educational purposes. Atomic masses are rounded. Follow your institution’s laboratory safety rules when handling acids, bases and other chemicals.

Leave a Reply

Share Your Love